Electro sex shock remote 10 m FS

Description

Range 10m, 9 intensities, 10 frequencies

Alternating current – max pulse 100V/ 20mA

Pulse frequency up to 100Hz/s

2 outputs for power – accessories (with dual cables, up to 4 additional accessories can be connected, i.e. up to 8 pads)

Included are 2x AAA 1.5V power supply batteries (total 3V), 2x AAA 1.5V controller batteries

Testing electro sex resources

In our experience, it is not much different in power from several times more expensive 9V sex stimulators (which state 100mA).

You can't hold it in your hand for long at full force. But if the electricity is distributed over a larger area, such as the smallest butt plug, it's not painful.

It will also properly pierce rubber and silicone electro aids.

More: Electro sex toys and experience

Technical features

Manufacturer:OEM Funny Steel

Weight: 48 g

Tips

Compatible electrical cables and accessories in the category Electrosex.

When purchasing a dual cable, you can connect twice as many accessories to the power supply.

The more devices you connect, the more current you distribute among them and the total current per accessory will decrease.

Instructions:

Not intended for cardiac patients and people with high blood pressure. The current should not be passed through the heart. (breast – back), over the head or neck. Try it on yourself first and then on your partner. Increase the intensity gradually. Do not leave your partner unattended.

Insert 2 x 2 AAA batteries (included) according to the polarity markings on the power source and remote control. Connect the optional accessory to one of the connectors on the power source (or 2 devices, each to 1 connector). Activate both – the controller and the power source (the blue diode on the power source and the controller is on). After use, deactivate both (the blue diode on the power source and the controller is off).

Be careful when aiming at devices with a very small surface area, such as nipple clamps. It is more intense on a smaller surface than when the current is spread over a large surface.

Driver

“On/Off” long press (4 seconds) turns on and off. Other buttons activate the respective mode. The last button “Speed” increases the pulse speed in “Tap” mode.

+ activates the program and adds strength

– power decreases and switches off at the lowest power

“Blast” – immediate program interruption and return to frequency 1 (reset without power off)

Mode – quick shutdown and simultaneous switching to the next frequency (the next frequency is then activated by pressing the + button)

Auto – moderately strong pulses in quick succession

Source :

“On/Off” long press (4 seconds) turns on and off.